STAADPro Training :

We conduct regular training programs for fresh graduates as well as experienced engineers.
Bentley certificate is given to all the participants.

There are general batches held on weekends for a  month. The batch starts, generally, on the first Saturday of the  month.  Classes are held on Saturdays and Sundays only, 4 half Saturdays and 2 full Sundays. The timing is, on Saturday 2.30pm to 6pm and Sunday 10am to 6pm

Special batches can be conducted for a group of minimum 8 participants. These batches  are for 3 to 5 full days as required i.e. from 10am to 6pm.



The course content is as follows :
STAADpro Structural Analysis and Design - Training Programme

STAADpro Software Basic Commands and facilities will be broadly discussed along with the theoretical background  :

  •  Overview of the package.
  • Commands and input instructions  / Generation of data files.
  • Units, Joints, Member definition, Element Definition, Group definition, Member
    properties, Steel Tables, Built-up sections, Material Constants, Geometric constant, Supports, Member releases, Member offsets, Tension only members, Compression only members, Inactive
    members etc.
  • Graphical input generation.
  • Basic loads like uniform load, point load, varying load, trapezoidal load, element load, area load, floor load, temperature load, pre-stress load, sinking support load,  uniform & trapezoidal pressure on elements. Uniform & concentrated moments, etc. Primary loads & load combinations.
  • Loading specifications and generation of loads including wind load, moving load, Earthquake load as per IS 1893. One way & two way slab load generators;
  • Types of Analysis and static check
  • Post processing, Verification of results, customised report generation, query and graphical facilities.
  • Design commands for steel structures as per IS 800
  • Design of  concrete structures  as per IS 456
  • Tips for
    • Correct modelling.
    • Data checking.
    • Avoiding the common mistakes in data file.
    • Managing huge input and output data.
  • Sample problems to illustrate the facilities available in the software package.
  • Special topics –
    • Simulation of Rigid Diaphragm
    • Shear wall modelling
    • Flat slab modelling
    • Raft modelling

Training schedule for general batches

Lecture Day Time Contents
1

Saturday

2.30 to 6 pm

- General overview of  the software
- Introduction of the menus
- preparation & analysis of simple structures

2

Sunday

10 to 6 pm

- Discussion of commands in detail which includes commands for units, generation of joints, members & elements with repeat all, group definitions,  property specifications, constants definitions, support specifications, member & element specifications.
- Introduction of Graphical menus
- Practice

3

Saturday

2.30 to 6 pm

Defining various loads, member loads, joint loads, element loads, temperature loads, pre-stress & post-stress loads, support displacement load, one way & two way slab loads, repeat load, and load combinations.

4

Saturday

2.30 to 6 pm

- Defining moving load, wind load & earthquake loads

5

Sunday

10 to 6 pm

- Discussion of graphical menus
- Report generation
- Other topics like shear walls, rigid diaphragms

6

Saturday

2.30 to 6 pm

- Discussion of design commands, concrete & steel

 

 

Training schedule for special batches

Lecture Day Time Contents
1 1 10 to 1 pm - General overview of the software
- Introduction of the menus
- preparation & analysis of simple structures
2 1 2 to 6 pm - Discussion of commands in detail which includes commands for units, generation of joints, members & elements with repeat all, group definitions,  property specifications, constants definitions, support specifications, member & element specifications.
- Introduction of Graphical menus
- Practice
3 2 10 to 1 - Defining various loads, member loads, joint loads, element loads, temperature loads, pre-stress & post-stress loads, support displacement load, one way & two way slab loads, repeat load, and load combinations.
- Practice
4 2 2 to 6 pm - Defining moving load, wind load & earthquake loads
- Practice
5 3 10 to 1 - Discussion of design commands, Concrete Design as per IS456 & Steel Design as per IS800
6 3 2 to 6 pm - Discussion of graphical menus
- Report generation
- Other topics like shear walls, rigid diaphragms
- Practice
Please contact for more information and for your specific requirements.
 

Report on STAADpro workshop / training in Chhattisgarh

STADD  Engineers. Mumbai conducted 4 STAADPro awareness programs in Chhattisgargh during last year. The programs were conducted at –

  • Chhattisgargh housing Board
  • Bhilai Steel Plant
  • SSIPMT, Bhilai  26 Dec to 31 Dec 2011
  • SSIPMT, Raipur 2 Apr 2012

All these programs were widely attended and appreciated by engineers in the region.  There were seniors as well as freshers in the list of attendees.
Out of these organizations, Chhattisgargh housing Board also purchased the software.
These programs were conducted with a prime objective of spreading awareness about Bentley products.
There were lectures, slide shows and interactive sessions. The lectures were mainly focused on the advantage of using the software. The slideshows emphasized on the overall use of the software. The interactive sessions focused on the users queries.
The participants welcomed the interactive sessions as most of the users problems were solved and they appreciated the authentic replies from senior structural consultants who have the through knowledge on the technical side as well as the use of the software.
This is a developing region and engineers grom the region welcome interaction from the experts from Mumbai to enhance their knowledge.
The first two programs were restricted to the engineers from the organiseation, while the next two were open to all. Thus, many consultants took advantage of the program.
The chairman of the SSIPMT group was widely impressed with the quality of the program as also the Head of the departments from various colleges from the region.
The program was organized in such a manner that it did not sound like just a marketing gimmick. That was the reason everyone widely appreciated the programs and we are invited in the region for conducting more and more such programs.
We also attach some of the photos of the program done recently at Raipur.

 
STAAD training at SSIET,  Bhilai Dec 2011
 

 
 
Training provided by STADD ENGINEERS, MUMBAI to Major clients -
 
  • Maharashtra State Electricity Board, Mumbai.
  • Public Works Department, CBD Design Circle, Navi Mumbai.
  • Central Railway Design Dept, VT, Mumbai.
  • Maharashtra State Electricity Transmission Company Limited, (Mahatransco) , Mumbai.
  • Chhattisgarh Housing Board Limited, Raipur.
  • Bhilai Steel Plant, Bhilai.
  • Shri Shankaracharya Group Of Institutions, Bhilai.
  • Shri Shankaracharya Institute of Technology, Raipur.
  • Reliance Gas Transportation & Infrastructure Ltd, Navi Mumbai.
  • ACC Limited, Thane.
  • Enginemates Heat Transfer Pvt. Ltd., Mumbai.
  • Integrated Industrial Services, Mumbai.
  • Sterling Engg. Consultancy Services Private Limited, Mumbai.
  • S. N. Bhobe and Associates, Navi Mumbai.
  • Satish Marathe, Pune.
  • Delcons structural Consultants, Pune.
  • Institution of Engineers Goa Centre, Goa.
  • CIDCO Ltd, Navi Mumbai office.
  • Equipack Engineers, Pimpri.
  Top / Back
   
 
Staadpro STAADfoundation RAM Concept PowerRebar Structural Microstation